sean_cabbagetown
New Member
Hey there guys - great forum with lot's of useful tips.
I am replacing my toilet, which should be an easy job, however the previous owners appear to have done some sort of complicated install job previously.
If you check out the photos, it looks like a 4" abs pipe with an abs bush fitting glued inside (or similar), and the original flange was attached to that (I don't have a before photo).
Based on the internal diameter a twist in or push tite won't fit, so I think that leaves me with a Oatey 4" over/external flange. My question is:
Thanks in advance for your help!
I am replacing my toilet, which should be an easy job, however the previous owners appear to have done some sort of complicated install job previously.
If you check out the photos, it looks like a 4" abs pipe with an abs bush fitting glued inside (or similar), and the original flange was attached to that (I don't have a before photo).
Based on the internal diameter a twist in or push tite won't fit, so I think that leaves me with a Oatey 4" over/external flange. My question is:
- Any issues with an external flange like this?
- Any special installation instructions? The internet doesn't have much (I assumed ABS cleaner and cement is sufficient).
- Anything else you would try?
Thanks in advance for your help!