This is my favorite forum for plumbing help ! I just joined but have read lots. Thanks.
I bought a house that the waste lines had no pitch and the ejector pump vented indoors. So starting from scratch.
I was married to a master plumber for 30 years so I have a clue and since he has died, I have lots of parts.
My current problem is the Eljer Emblem toilet that I want to reuse ( it's dark blue and matches shower) The base is not flat. Have about 1/8" gap front and back using level when it's upside down. Can I just grind it down ?
Other ideas are to use thin plastic cutting board pieces to shim it up.
Thanks.
I bought a house that the waste lines had no pitch and the ejector pump vented indoors. So starting from scratch.
I was married to a master plumber for 30 years so I have a clue and since he has died, I have lots of parts.
My current problem is the Eljer Emblem toilet that I want to reuse ( it's dark blue and matches shower) The base is not flat. Have about 1/8" gap front and back using level when it's upside down. Can I just grind it down ?
Other ideas are to use thin plastic cutting board pieces to shim it up.
Thanks.