Hackney plumbing
Homeowner
Who here on the forum thinks they know more about PVC and ABS than the engineers at Charlotte pipe? I'll be calling them tomorrow with this wiz kid idea and see what they have to say about it.
My code says...Pipe and fittings SHALL be installed according to the manufacturers directions. Show me in the directions for ABS and PVC where is says if you need to make a quick repair just cut a coupling and snap it around the pipe. You cant.
I can installed a 3' section of pvc pipe between cast iron and jump up and down on it with all 200 pounds of me with banded couplings.......try that with two of your half couplings with the pipe sawed half way into.
My code says...Pipe and fittings SHALL be installed according to the manufacturers directions. Show me in the directions for ABS and PVC where is says if you need to make a quick repair just cut a coupling and snap it around the pipe. You cant.
I can installed a 3' section of pvc pipe between cast iron and jump up and down on it with all 200 pounds of me with banded couplings.......try that with two of your half couplings with the pipe sawed half way into.
Last edited: