CanOfWorms
Member
So I just reinstalled my littlebottoms kid sized toilet after having a tile floor installed. I put the seal with flange on the bottom of the bowl and pressed into place. Hooked it up and flushed. It leaked a little so I pulled it and pressed another just wax seal onto the other seal. On the box it said "for optimal sealing temp should be above 70"
So before I turn this toilet on I put a space heater to get the temp up to about 80 for a few hours.
I will press bowl down again and then tighten bolts.
Does anyone see a problem with this?
So before I turn this toilet on I put a space heater to get the temp up to about 80 for a few hours.
I will press bowl down again and then tighten bolts.
Does anyone see a problem with this?