trinculo54
New Member
- Messages
- 20
- Reaction score
- 0
- Points
- 0
Okay; I while back I posted a question regarding a 10ft water test that my inspector wants to see...I have since gone out and bought a test tee with a an inflatable test tee balloon. Here in Oregon they sell a toilet flange that has a knock-out top so you can complete this water test without having to plug this hole. The problem is that once I glue this in for the test I then have to patch the surrounding sub-floor as well as install the ¼†hardy backer and ¼†of tile. Normally I would set the height of the drain and then complete the sub-floor, tile and then put on the flange. With the water test I don't have this option. Does anyone have another idea? Just thought I would ask before I took the next step and glued everything.
Thanks for the reply
Thanks for the reply