Dan Park
Member
Hi all, I'm currently moving a shower around and redoing the plumbing in my bathroom. My plan is to do a curb less shower. So after the plumbing, I'll pour the slab in the shower area about 2in lower. Then I'll use deck mud to make the slope to the drain.
As for the plumbing, my plan is to do something similar to this diagram.
It's my understanding that the trap arm length should be at least twice the diameter of the pipe diameter. In my case I'm using 2" ABS so my trap arm will be at least 4" long.
For the venting, can I use a 2in/1.5/2in sani tee for the venting to be 1.5 inches or does it have to be 2in?
Any other suggestions with using Infinity drains?
Thanks everybody!
As for the plumbing, my plan is to do something similar to this diagram.
It's my understanding that the trap arm length should be at least twice the diameter of the pipe diameter. In my case I'm using 2" ABS so my trap arm will be at least 4" long.
For the venting, can I use a 2in/1.5/2in sani tee for the venting to be 1.5 inches or does it have to be 2in?
Any other suggestions with using Infinity drains?
Thanks everybody!