Can anyone ID this toilet?

[PaulPal]

Can anyone ID this toilet?

I need to replace the fill valve, which is 7 and 3/4 inches height with a fill line at 6 and 3/4 inches

 

[WorthFlorida]

Look on the back of the tank and the underside of the lid. Sometimes brand and model numbers are molded into it or printed. It's a dual flush type. It's the tower that is unique, the fill valve is pretty standard.

Google "dual flush toilet valve".

 

[Sponsor]

 

[Terry]

Any standard fill valve will work there, but the fill tube goes in the overflow tube and not pointed down in the tank where it will siphon and keep refilling.

 

[Reach4]

I wonder if this hole is where the refill hose is supposed to go. Does it look like that routes the water into the overflow?

 

[PaulPal]

Look on the back of the tank and the underside of the lid. Sometimes brand and model numbers are molded into it or printed. It's a dual flush type. It's the tower that is unique, the fill valve is pretty standard.

Google "dual flush toilet valve".

There is nothing on the tank or lid... and the fill valve is far from standard...I have yet to find one that fills to 6 3/4 inches that is less than 7 3/4 inches tall