What fitting do I need to connect bidet seat directly to wall valve?

[petunia44]

I have a wall-hung Toto Aquia on a Geberit carrier, so my contractor put in a dedicated valved water supply for a bidet on the wall next to it. I bought a Brondell Swash 1400, but it came with a T-valve with connections for a standard toilet. What fitting do I need to adapt the 3/8" valve to the Brondell water connection? Thanks!

 

[Terry]

Brondell doesn't say what the size and thread is for the bidet connection.
My guess is a 1/2" iron pipe connection. Take the hose to a hardware store and see what threads onto it.
And then post back and let us know. I've installed plenty of Brondell bidet seats before but haven't had to know the threading before.

https://www.brondell.com/media/wysiwyg/bidet-seat/s1200-1400-owners-manual-060817-web.pdf

 

[Sponsor]

 

[petunia44]

I don't think I can post a picture yet, but this fitting worked great.
http://www.lasco.net/reducing-adapt...12x38-flex-conn-adpt-p-7997.html#.XAWgbWhKhPY

The brondell connects to a 1/2" MIP. Hope this helps.

 

[JayUknowme]

Does anyone know how to connect the Geberit water inlet kit model# 249.801.00.1 directly to the 798 frame plastic outlet for the bidet feature? I was thinking of using a shark bite connection to the frame since I have a finished wall.