Taylorjm
Active Member
Hello. A few years ago we purchased a house with a submersible well, my first experience with a well but I'm familiar with home plumbing. I noticed that the well comes on at about 35psi and shuts off at 60psi. Is this a normal offset for a 40/60 switch? I like to replace things on my terms and before they fail, if that's a sign of failing. I looked at the adjustment screws on the switch and none of them really allow for an offset adjustment like that. The well was drilled in 2012 and a new pump installed and from the look of the setup I would guess the bladder tank and switch were replaced at that time.