My water pressure tank doesn't seem to be holding any water. It is set to "call for" water when it reaches 40 psi and "turn off" at 60 psi, but the pressure drops instantly when someone uses any water in the house. Thus, it is repeatedly getting new water from the well for even a simple toilet flush (flush = psi drops to 40 then back up to 60 for ~3 times per flush). The water also seems to surge when washing hands .... you can notice the water pressure not being strong and then surging when it is at the 60 psi level.
I don't know if it is due to a clog somewhere or I should drain / refill the pressure bladder in the tank.
Guidance is greatly appreciated.
I don't know if it is due to a clog somewhere or I should drain / refill the pressure bladder in the tank.
Guidance is greatly appreciated.