niftygeorge
New Member
- Messages
- 4
- Reaction score
- 0
- Points
- 0
First, This forum is great! The posts are informative and entertaining. Now , my question?The distance from the wall behind the existing toilet to the flange bolts is exactly 12 inches, however, the distance from the base board to the flange bolts is 10 and three quarter inches. Will this model, Toto Darthmouth, fit? If not, which model Toto will fit these rough-in requirements?
The existing toilet, a 3 year old,American Standard 4112,1.6 gpf, ADA, elongated bowl, 12'' rough-in fits fine. It does does not flush fine nor can it take a standard toilet seat. The toilet seat mounting holes are out of alignment by 1/4 inch which gives the toilet seat a unique off center angle.
The existing toilet, a 3 year old,American Standard 4112,1.6 gpf, ADA, elongated bowl, 12'' rough-in fits fine. It does does not flush fine nor can it take a standard toilet seat. The toilet seat mounting holes are out of alignment by 1/4 inch which gives the toilet seat a unique off center angle.
Last edited: