jevonmckinzie
New Member
A month in the making, and I think I am ready to submit my entire remodel plans for a permit to begin work very soon. One of my biggest challenges has been designing the plumbing for the new master and guest bathrooms.
Here it is. I would just like some feedback on the design. If its too complicated or anything anyone would do differently and of course, why. Any help or suggestions would be appreciated.
As for the project, I am adding two new bathrooms on the main floor. There is already one bathroom on this floor and one in the basement. I plan on using 3" pipe as the main drain pipe that will run horizontal to the soil stack that is about 30' away. For the toilets, I was planning on using 2" or 3" DWFC. For the sinks, lavs 1.5" DWFC. Shower and tub, 3" DWFC. The vents are all 3", except for the lavatories, and they will tie together in the attic with a 4" through the roof. The farthest fixture from the main vent is the bath, which will be approx. 8-9' away.
http://picasaweb.google.com/jevonmckinzie/MasterBathroom?feat=directlink
Here it is. I would just like some feedback on the design. If its too complicated or anything anyone would do differently and of course, why. Any help or suggestions would be appreciated.
As for the project, I am adding two new bathrooms on the main floor. There is already one bathroom on this floor and one in the basement. I plan on using 3" pipe as the main drain pipe that will run horizontal to the soil stack that is about 30' away. For the toilets, I was planning on using 2" or 3" DWFC. For the sinks, lavs 1.5" DWFC. Shower and tub, 3" DWFC. The vents are all 3", except for the lavatories, and they will tie together in the attic with a 4" through the roof. The farthest fixture from the main vent is the bath, which will be approx. 8-9' away.
http://picasaweb.google.com/jevonmckinzie/MasterBathroom?feat=directlink