Help with Bathroom faucet ID or repair.

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by kennn, Dec 29, 2008.

  1. kennn

    kennn New Member

    Dec 29, 2008
    I am trying to replace washer in a bathroom faucet. No idea of the manufacturer. I assumed that you removed the top screw in the handle and pull it off to get to the stem. I exerted quite a bit of force trying to remove it but it won't budge. No evidence of any set screws or nuts except one on the underside of the sink that secures its on the sink. Pics are at the URL below. Anyone have any ideas of he manufacturer or how to repair this model. Thanks in advance.
  2. Redwood

    Redwood Master Plumber

    Dec 15, 2007
    Service Plumber
    If you're lucky it's a Delta or, Peerless.
    With the screw from the top removed the handle should slide up and off.
  3. Sponsor

    Sponsor Paid Advertisement

  4. Terry

    Terry Administrator Staff Member

    Aug 17, 2004
    Bothell, Washington
    It's a Delta Delex.
    With the top screw removed, you can left the handle up.
Similar Threads: Help Bathroom
Forum Title Date
Plumbing Forum, Professional & DIY Advice Help, no hot water during bathroom remodel Mar 9, 2017
Plumbing Forum, Professional & DIY Advice Bathroom rough in help - DWV Feb 1, 2017
Plumbing Forum, Professional & DIY Advice Help IDing a bathroom sink part Jan 11, 2017
Plumbing Forum, Professional & DIY Advice Turned one shut off valve now there is NO water in bathroom sink. HELP Dec 24, 2016
Plumbing Forum, Professional & DIY Advice Bad AAV smell in my master bathroom? Help! Dec 23, 2016

Share This Page