Brad Perkins
Member
Trying to hook up my well to a holding tank in my basement. My plan is to run 100 ft of 1 inch poly to the house. Then on the inside I thought about using 1 inch PEX for everything to tie into my manifold. I can't help but notice how much smaller 1 inch PEX is than 1 inch poly. And since I planned on all PEX inside, I started to wonder about the connection to my submersible in the tank. Should I use 1 inch poly that transitions to 1 inch PEX going into the pressure tank or would it be ok to use 1 inch PEX off the pump too?