What's a good free program to design a CD Insert?

Users who are viewing this thread

Verdeboy

In the Trades
Messages
2,041
Reaction score
6
Points
0
I recently finished recording a bunch of songs at my home studio and want to design a CD cover by myself, inexpensively. Is there a cheap or free program that has the templates built in, so all you have to do is upload your artwork and CD info and print out the insert? That way, I can print them out as needed.

Thanks
 

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,462
Points
113
Location
Bothell, Washington
Website
terrylove.com
Or another cool way is to get an inkjet printer that prints right on the CD.
Epson make some.

by the way, do I get a CD to listen to?
Terry
 

Verdeboy

In the Trades
Messages
2,041
Reaction score
6
Points
0
Thanks for both your inputs. I found a good program for designing the jewel case insert at audiolabel.com, and I'll probably use my lightscribe-enabled CD burner for the CD label. The Epson sounds neat. I'll have to look into that.

It'll be a while before I release a CD, but you can hear some of my stuff at the following link: http://www.gilanet.com/silverweb/radio/

Be warned, it's pretty left-wing political.
 

Hotfloor

New Member
Messages
13
Reaction score
0
Points
0
Location
Santee, CA
Deep burner is good as well.

It gives you the ability to have a splash screen come up if the CD is inserted into a PC so you can customize the look of the outside and inside of your CD. Great for track lists that you can click on to play or multiple power point presentations...
 
Top