Water coming out from behind cold water knob.

[rush_2929]

I went to turn the water off on my bathtub faucet because it was leaking. I turned the hot water off fine but when I tried to turn the cold water off, I guess something broke. Because water came shooting out from behind the knob and I couldn't turn it tight. It kept turning. So I turned the water off coming into the house and removed both the knobs. From what some people have told me I'm pretty sure I can fix this on my own. But what parts do I need and how do I take the faucet off? I looks like this but the shower latch is closer to the wall.

 

[Cwhyu2]

Packing nut is loose or needs to be repacked can you post a picture,

 

[Sponsor]

 

[rush_2929]

Packing nut is loose or needs to be repacked can you post a picture,

Wish I could, I don't have a phone or camera to do that with. But can you post a diagram? The faucet looks like this and I took the hot and cold water knobs off and I can see the plastic parts the the knobs screw onto.

 

[Cwhyu2]

Send me a link to the site where you got the picture as I tried to look for it and and could not find it,

 

[Cwhyu2]

Also is this a mobile home?

 

[rush_2929]

Also is this a mobile home?

http://www.completemobilehomesupply.com/Tub_Faucet_with_Shower_Diverter_p/faucet11.htm

And yes, it's a double wide.

 

[Cwhyu2]

Could not find a parts breakdown so my best guess would be a bad o ring.

 

[Cwhyu2]

Might be these?