KineticoUser
Member
- Messages
- 187
- Reaction score
- 3
- Points
- 18
I have 3/4" brass garden valves outdoors. Some started leaking, so I decided to replace the washers. I couldn't get the washer screw out without drilling it out. I'm looking for replacement screws and I don't see 8-32 X 3/8" brass machine screws with Phillips heads. I see round slotted or pan slotted or pan Phillips in stainless steel. Since this will be screwed into a brass valve, which would you recommend? I don't replace the washers frequently, so there's a good chance it will be frozen in when I have to replace it again. I used a round slotted brass screw for now, so I can turn my water on, but if another option is preferable, please let me know.