jimpc
New Member
Just got a Toto Vespin II before realizing that the shutoff valve needed to be 5.5" off center. Mine is 5" off center. Toilet is basically a 12.5" rough in, that's where the bolts are from the tiled wall. However I'm not getting the clearance I was expecting from the wall. I;m not even sure I have enough clearance to utilize the Dahl E33-2386-A.
Here are some pictures:
1) Valve clearance off center
2) Rough in length
3) The clearance it looks like I'll have when the toilet is set up.
So what do you guys think? Think the Dahl skirted toilet valve will work? What if I get the unifit 10" rough in adapter to give me 2 more inches?
Here are some pictures:
1) Valve clearance off center
2) Rough in length
3) The clearance it looks like I'll have when the toilet is set up.
So what do you guys think? Think the Dahl skirted toilet valve will work? What if I get the unifit 10" rough in adapter to give me 2 more inches?