Mr. Grieves
New Member
I have found several threads discussing how to deal with a broken flange and others describing how to raise a flange to be flush with the finished floor but not both problems at the same time.
The basement toilet in my home would occasionally leak when flushed so I finally decided to replace it this weekend. When I removed it today I found that the flange was cracked on both sides and it was sitting almost a half-inch below the tile on one side. I'm not sure if I should use a flange repair ring or a flange extender or both (is that even possible?) to address the two problems. Would be grateful for any advice.
The basement toilet in my home would occasionally leak when flushed so I finally decided to replace it this weekend. When I removed it today I found that the flange was cracked on both sides and it was sitting almost a half-inch below the tile on one side. I'm not sure if I should use a flange repair ring or a flange extender or both (is that even possible?) to address the two problems. Would be grateful for any advice.