CountryBumkin
Active Member
My home is on a well in central Florida. I have a water conditioner (chlorine injection) with softener that was installed in 2007 and "rebed" once (around 2010 or 2011). Now I am getting sulfur smell, and I think its time for service and maybe "rebed".
The original invoice lists:
1 Uni-Dose Pump w/tank
1) Grid Control
1) Mod 2510 C.F.
1) Mod 2510 W.S w/brine tank
1) Utizo Tank
My installer appears to have retired, so I'll be looking for new guy.
What information can I get now to make it easier for him to setup my system and use the proper/best filter media?
I just sent a water sample to National Testing Labs (water taken from Well before equipment).
I believe there is some test/info needed regarding how much water flow I have (like how long to fill a 5 gallon bucket) or such.
Is there anything else I need to know/provide to the water system guy?
The original invoice lists:
1 Uni-Dose Pump w/tank
1) Grid Control
1) Mod 2510 C.F.
1) Mod 2510 W.S w/brine tank
1) Utizo Tank
My installer appears to have retired, so I'll be looking for new guy.
What information can I get now to make it easier for him to setup my system and use the proper/best filter media?
I just sent a water sample to National Testing Labs (water taken from Well before equipment).
I believe there is some test/info needed regarding how much water flow I have (like how long to fill a 5 gallon bucket) or such.
Is there anything else I need to know/provide to the water system guy?