jeff2201
New Member
- Messages
- 5
- Reaction score
- 0
- Points
- 0
I am having an issue with a diverter on a bathtub faucet. The faucet is a one knob for hot/cold with the diverter knob on the tub spout.
With the faucet turned slightly so water is at a lower pressure, the diverter works normally. However, if I increase the pressure to the spout water will start to come out of the shower.
I tinkered with the diverter with no luck. Finally I removed the knob and diverter assembly from the spout altogether and I still had the issue of water coming out of the shower head. I'm scratching my head on this one.
Any thoughts?
With the faucet turned slightly so water is at a lower pressure, the diverter works normally. However, if I increase the pressure to the spout water will start to come out of the shower.
I tinkered with the diverter with no luck. Finally I removed the knob and diverter assembly from the spout altogether and I still had the issue of water coming out of the shower head. I'm scratching my head on this one.
Any thoughts?