roflwaffle
New Member
Hello,
I recently replaced this cartridge with a RP19804, which works fine, but it bugs me that I couldn't find replacement washers for the back end of the old cartridge that fit's into the hot/cold passageways in the wall.
I first replaced the seats/springs inside the original cartridge, and that did nothing for the leak. I then took the old cartridge to the store and the o-rings seemed to match up best with #235 o-rings at the store, but those unfortunately don't fit (smidge too too large).
At that point I bought the replacement cartridge, so everything's working, but it seems like a waste to replace a whole cartridge when I can just replace a couple o-rings.
Does anyone know what size o-ring would likely fit the older cartridge?
I recently replaced this cartridge with a RP19804, which works fine, but it bugs me that I couldn't find replacement washers for the back end of the old cartridge that fit's into the hot/cold passageways in the wall.
I first replaced the seats/springs inside the original cartridge, and that did nothing for the leak. I then took the old cartridge to the store and the o-rings seemed to match up best with #235 o-rings at the store, but those unfortunately don't fit (smidge too too large).
At that point I bought the replacement cartridge, so everything's working, but it seems like a waste to replace a whole cartridge when I can just replace a couple o-rings.
Does anyone know what size o-ring would likely fit the older cartridge?