I'm trying to update my older brass and chrome finish monticello with this:
https://www.homedepot.com/p/MOEN-Br...d-Nickel-Valve-Not-Included-T4943BN/100672388
I have the same hardware as this post with the same large nut holding down the cartridge as shown:
https://terrylove.com/forums/index.php?threads/moen-monticello-roman-tub-valve-repair.54124/
Also attached an image of handle section.
Before unscrewing the nut and trying to pull anything, I wanted to make sure I was doing this correctly and that the trim kit I purchased will work. I did swap the spout so at least that works.
If the kit I bought won't work, please let me know.
https://www.homedepot.com/p/MOEN-Br...d-Nickel-Valve-Not-Included-T4943BN/100672388
I have the same hardware as this post with the same large nut holding down the cartridge as shown:
https://terrylove.com/forums/index.php?threads/moen-monticello-roman-tub-valve-repair.54124/
Also attached an image of handle section.
Before unscrewing the nut and trying to pull anything, I wanted to make sure I was doing this correctly and that the trim kit I purchased will work. I did swap the spout so at least that works.
If the kit I bought won't work, please let me know.