hottubbrad
New Member
I am installing an American Standard Elongated bowl on a tile floor over concrete slab. It is a 10" R.O. toilet. The flange was glued internally into the 4" drain and the top of the flange sits 5/8" above the finished floor.
This toilet has a 3/4" gap for the wax. In other words, 3/4 minus 5/8 = 1/8" of wax between the flange and the toilet.
I have used 2 wax rings so far and they both have leaked (slightly).
What is the solution??? I think I need more wax between the flange and the toilet.... do I raise the toilet or grind the flange....? or what??
Thanks.
This toilet has a 3/4" gap for the wax. In other words, 3/4 minus 5/8 = 1/8" of wax between the flange and the toilet.
I have used 2 wax rings so far and they both have leaked (slightly).
What is the solution??? I think I need more wax between the flange and the toilet.... do I raise the toilet or grind the flange....? or what??
Thanks.