I am moving the toilet in my bathroom to an opposite wall and will need to extend the 3" sewer line about 9ft. The original toilet is at the end of the sewer line which will be removed. I would then use a 90 degree long sweep to connect the two sewer lines. I am using the UPC code.
In the diagram below does the plumbing look correct for the toilet? Also does the 2" vent line for the toilet need to go straight up to the attic or can it have a 90 degree in it? I do have a 1.5" vanity vent line about five feet from the toilet, wondering if I could change it to a 2" and have the toilet vent line connect into it instead running a separate vent line?
I appreciate the help as don't have any plumber close to where I live.
In the diagram below does the plumbing look correct for the toilet? Also does the 2" vent line for the toilet need to go straight up to the attic or can it have a 90 degree in it? I do have a 1.5" vanity vent line about five feet from the toilet, wondering if I could change it to a 2" and have the toilet vent line connect into it instead running a separate vent line?
I appreciate the help as don't have any plumber close to where I live.
Last edited by a moderator: