Speedbump
Active Member
I brought this problem up here before. Since every one says a toilet won't work without a vent. I will agree. However the toilet does flush sometimes quite well. The floor the toilet sits on is 8" of concrete. I've been there with a jackhammer in the past. There is no way to install a vent without tearing up a lot of this floor which I am unwilling to do. I don't know why this unit was installed this way, but it's what I have to deal with.
I managed to find the 3" pipe leading to the tank about 3 feet from an outside wall 10 feet from the stool. I cut a 1-1/2" round hole in the top and inserted a short piece of PVC pipe into it. This provides the only vent in the entire line.
My question: Which low flow toilet would work the best to not cure but possibly improve this situation. I don't know what brand toilet I have now but it is 3+ gallon flush.
I am going to order one from Terry, but I want to get the best option possible.
Thanks in advance.
bob...
I managed to find the 3" pipe leading to the tank about 3 feet from an outside wall 10 feet from the stool. I cut a 1-1/2" round hole in the top and inserted a short piece of PVC pipe into it. This provides the only vent in the entire line.
My question: Which low flow toilet would work the best to not cure but possibly improve this situation. I don't know what brand toilet I have now but it is 3+ gallon flush.
I am going to order one from Terry, but I want to get the best option possible.
Thanks in advance.
bob...