netrouter
New Member
- Messages
- 6
- Reaction score
- 0
- Points
- 0
I am in the process of installing a wet bar and I need to relocate my plumbing fixtures. The previous owner removed a wet bar and reversed the fixtures into the garage for a sink but I am brining the pipes back into the living room and want to move them about 4 feet to an adjoining wall. I have attached pictures which show the drywall removed from the fixtures and a red square indicating where I would like to relocate the fixtures. The piping is all 1/2 galvanized, and you will notice the drain is pvc.
I was wondering what the best method is for turning the fixtures back around and running them down the wall to the new location. Is it a simple hack off the pieces, drill holes through the studs and relocate the pipes?
Any advice would be greatly appreciated especially around the relocating of the drain.
Thanks
I was wondering what the best method is for turning the fixtures back around and running them down the wall to the new location. Is it a simple hack off the pieces, drill holes through the studs and relocate the pipes?
Any advice would be greatly appreciated especially around the relocating of the drain.
Thanks