Hi All,
I'm thinking of installing a larger vanity, and want to try to get the toilet closer to being centered between the vanity and the wall on the other side. So I thought the 1.5" offset would be nice. But I'm concerned about reduced drainage power and clogging. Is it worth installing the following offset flange?
Oatey 3-4 in. PVC Offset Open Toilet Flange with Stainless Steel Ring
Item #1216649Model #436054
https://www.lowes.com/pd/Oatey-3-4-...-Flange-with-Stainless-Steel-Ring/1000720810?
Existing 36" vanity edge is 26" from toilet drain centerline (LOTS of room). The potential new larger vanity is 48", so its edge would be 14" from toilet centerline (which is below the 15" required by code, right?). There's plenty of room on the other side where the wall is.
We currently don't have any clogging problems, but if I install the offset flange, am I likely to start having clogging problems?
Thanks
I'm thinking of installing a larger vanity, and want to try to get the toilet closer to being centered between the vanity and the wall on the other side. So I thought the 1.5" offset would be nice. But I'm concerned about reduced drainage power and clogging. Is it worth installing the following offset flange?
Oatey 3-4 in. PVC Offset Open Toilet Flange with Stainless Steel Ring
Item #1216649Model #436054
https://www.lowes.com/pd/Oatey-3-4-...-Flange-with-Stainless-Steel-Ring/1000720810?
Existing 36" vanity edge is 26" from toilet drain centerline (LOTS of room). The potential new larger vanity is 48", so its edge would be 14" from toilet centerline (which is below the 15" required by code, right?). There's plenty of room on the other side where the wall is.
We currently don't have any clogging problems, but if I install the offset flange, am I likely to start having clogging problems?
Thanks