Rman
Master mechanic
Hi. I have a two year old 3/4 hp 10 gpm 2 wire well pump down 50 feet in a 78 foot well that produces 20 gpm
The whole piping from the well to the utility rooms is 1 inch pex
The well pipe comes into the house at the back then travels along the ceiling joists to the front of the house where the utility room is
I have CSV valve set up with a 12 gal tank. Problem from first day is when the pump is running I hear it throughout the 1st floor
Pressure on CSV is at 55 psi shut off at 70 psi works very well
Any thoughts of why or how to quite the noise. All of the plumbing is pex. This was a new build but the well was drilled in 1986
All of the plumbing I did myself with a helper. Previous home the well pipe entered the front of the house and plumbing was all copper. All I heard was the pressure switch clicking. Thanks
The whole piping from the well to the utility rooms is 1 inch pex
The well pipe comes into the house at the back then travels along the ceiling joists to the front of the house where the utility room is
I have CSV valve set up with a 12 gal tank. Problem from first day is when the pump is running I hear it throughout the 1st floor
Pressure on CSV is at 55 psi shut off at 70 psi works very well
Any thoughts of why or how to quite the noise. All of the plumbing is pex. This was a new build but the well was drilled in 1986
All of the plumbing I did myself with a helper. Previous home the well pipe entered the front of the house and plumbing was all copper. All I heard was the pressure switch clicking. Thanks