JoshRountree
Member
When the well pipe (hdpe, pvc, doesn't matter) comes out of the well seal, what's the preferred fitting?
Since I have the black poly pipe, I was thinking of using something like this - http://www.supplyhouse.com/Spears-1...nsert-x-MIPT?gclid=CJ7v_Yzu88MCFQMT7Aodjk4AYQ
Then just going to 1" pex after that. Would that work? Does anyone else have a better idea? I've seen a tee with a plug used too - http://www.buypumpswholesale.com/files/1928173/uploaded/wellhead-diagram-L.gif
Thanks, (my well head froze and I might have to pull the pump, so I want to replace the fittings, I don't have a lot of faith in the current ones lasting if I break them apart)
Since I have the black poly pipe, I was thinking of using something like this - http://www.supplyhouse.com/Spears-1...nsert-x-MIPT?gclid=CJ7v_Yzu88MCFQMT7Aodjk4AYQ
Then just going to 1" pex after that. Would that work? Does anyone else have a better idea? I've seen a tee with a plug used too - http://www.buypumpswholesale.com/files/1928173/uploaded/wellhead-diagram-L.gif
Thanks, (my well head froze and I might have to pull the pump, so I want to replace the fittings, I don't have a lot of faith in the current ones lasting if I break them apart)