Venting a kitchen sink

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by pinledge66, May 9, 2013.

  1. pinledge66

    pinledge66 New Member

    May 9, 2013
    I have a question about venting a kitchen sink in a new location. My kitchen remodel plan includes moving the sink away from its current vent to a different location on the adjacent wall in the kitchen. It would be possible to run a new vent up to the roof through the attic space on the 2d floor above but would require a horizontal run of 6 feet to do that, although I would hate to penetrate my clay tile roof. Alternatively, it appears that my other option would be to run an accessory vent starting from above the sink then run it horizontally 8' through wall studs then make a 90 degree turn to run through another 8' of studs (no studs that I mention are load-bearing) to tie into the current vent. It will be possible to properly pitch any horizontally lines as necessary in either scenario. Any thoughts? Happy to clarify if my description is unclear.
  2. Terry

    Terry Administrator Staff Member

    Aug 17, 2004
    Bothell, Washington
    You are allowed 1/3 the vertical for the horizontal runs. More than that and they like to see it bumped one size.
  3. Sponsor

    Sponsor Paid Advertisement

Similar Threads: Venting kitchen
Forum Title Date
Plumbing Forum, Professional & DIY Advice Venting a Utility Tub directly below Kitchen Sink Sep 25, 2017
Plumbing Forum, Professional & DIY Advice Kitchen Sink Drain Pipe too High...venting question Sep 23, 2015
Plumbing Forum, Professional & DIY Advice Kitchen sink venting question Mar 9, 2014
Plumbing Forum, Professional & DIY Advice Stubborn kitchen sink venting problem Jun 30, 2013
Plumbing Forum, Professional & DIY Advice Kitchen sink venting height Mar 31, 2013

Share This Page