Snets
New Member
Can anyone tell me if I am OK lowering the trap on my shower drain? I want to go around a 1/2" copper pipe with some 45 degree elbows. going down to the trap. which will require me to add about three inches to the depth.
That would put the bottom of the trap at 20.5" from where the water will enter the drain at the shower floor.
The photo shows where the drain should land to be in the middle of the shower floor.
Thanks!
That would put the bottom of the trap at 20.5" from where the water will enter the drain at the shower floor.
The photo shows where the drain should land to be in the middle of the shower floor.
Thanks!