Blown
Engineer
I have a 1hp submersible well pump that will go in an 80ft well (25ft to static water).
I lost the instruction manual for the pump. It's a Red Jacket "Grizzly" 100F21125G7. It runs on 230V.
There are three wires coming from the pump. Two black, one green. How do I know what to hook to what?
I know this gets into electrical stuff, but what guage of wire should I use, and what size of breaker? There will probably be close to 200ft of wire to get 230V from my breaker box in the basement to the pump in the well.
Do the connections on the wires at the pump need to be completely sealed from water?
Also, how does a torque arrester work, do I need one, and how/where do I install it?
I lost the instruction manual for the pump. It's a Red Jacket "Grizzly" 100F21125G7. It runs on 230V.
There are three wires coming from the pump. Two black, one green. How do I know what to hook to what?
I know this gets into electrical stuff, but what guage of wire should I use, and what size of breaker? There will probably be close to 200ft of wire to get 230V from my breaker box in the basement to the pump in the well.
Do the connections on the wires at the pump need to be completely sealed from water?
Also, how does a torque arrester work, do I need one, and how/where do I install it?