DIYorBust
Active Member
Hello,
I would like to add a tee to a cast iron 4" stack to run a branch for a washing machine. I'm thinking about using a riser clamp and 2x4s to support it above the cut.
I'm also concerned that I won't have enough play to get the tee and the couplings installed. Is this likely to be a problem? Am I missing anything else? I really want to be careful with this project.
Thanks!
DIY
I would like to add a tee to a cast iron 4" stack to run a branch for a washing machine. I'm thinking about using a riser clamp and 2x4s to support it above the cut.
I'm also concerned that I won't have enough play to get the tee and the couplings installed. Is this likely to be a problem? Am I missing anything else? I really want to be careful with this project.
Thanks!
DIY