Single vanities on back to back bathrooms, horizontal drain

[spidey417]

I wanted to see if anyone could provide feedback on this two single vanity on back to back bathroom horizontal drain and direct vent setup. Working on VTR next...

Thanks!

 

[WorthFlorida]

An inspector may have an issue with the vent pipe to the 3" stack. PVC glue joints are very strong but they are not designed to take an angle like that. Over time from the constant stress, the glue joint could fail.

 

[Sponsor]

 

[spidey417]

An inspector may have an issue with the vent pipe to the 3" stack. PVC glue joints are very strong but they are not designed to take an angle like that. Over time from the constant stress, the glue joint could fail.

Thanks for the feedback, yes agreed it wasn't my best measurement. Do you suggest any strapping or other means of securing to help prevent future failure? I'd rather not take it apart at this point...

 

[Jeff H Young]

I saw first pic couldnt tell what the problem was from that angle but scrolling poor alighnment obvious. It looked good otherwise , I cant think of anything that will help as for strapping. be your own judge on whether to fix it