My house is 1920's and I'm currently doing kitchen renovation. Since I have the kitchen gutted and the cast iron waste exposed, I'm thinking it's a good idea to replace it with PVC...
If I do...when I make the cuts from the kitchen to remove that section what prevents the section above from dropping down? Even if it shifted a little down this will cause a leak in the roof because this is where it is vented.
Anything special I should do? Any precautions? Suggestions?
Thanks...
If I do...when I make the cuts from the kitchen to remove that section what prevents the section above from dropping down? Even if it shifted a little down this will cause a leak in the roof because this is where it is vented.
Anything special I should do? Any precautions? Suggestions?
Thanks...