Post Approval?

[MightyKC]

Tried to make a post asking a question about a DWV inspection a couple of days ago and after typing it up and submitting it, the screen told me it was submitted for approval. Does anyone know how long that takes? It's been 2 day and was trying to get advice before the inspection on Tuesday.

 

[srttruck]

No idea, But I'm having the same issue with a new post I created as well. It might be something that ties to post count perhaps?

 

[Sponsor]

 

[anonimoose]

Hello, I'm wondering this too!

 

[Jeff H Young]

well you can wait forever but Id re post , its a very good site but I dont know who runs it or how much work it is

 

[Tuttles Revenge]

No idea, But I'm having the same issue with a new post I created as well. It might be something that ties to post count perhaps?

UPC Wet Venting Bathroom help, Version 3,122

Ok, Hello all. I've been a long time lurker on this site and have learned quite a bit. I've read a pretty much all the topics on wet venting and still struggling on proper design. We're working with UPC 2015 here. On all 3 of my photos I'll upload here I'm thinking of venting on the Lav's...

terrylove.com

 

[Tuttles Revenge]

Hello, I'm wondering this too!

Correcting a dry fit

Hello! I am shrinking a bathroom that had a really messed up plumbing situation (like an unvented shower) that I'm trying to improve. I'm in NY State. I did an initial dry fit, then more research, and realized I did a few things wrong (like trying to horizontal vent the shower to an old unused...

terrylove.com

 

[Tuttles Revenge]

Tried to make a post asking a question about a DWV inspection a couple of days ago and after typing it up and submitting it, the screen told me it was submitted for approval. Does anyone know how long that takes? It's been 2 day and was trying to get advice before the inspection on Tuesday.

DWV Water Test Level Keeps Dropping But No Leaks

A bit frustrated and hoping someone here can reassure me or help me find a way to pass a plumbing DWV rough-in inspection. City of Charleston, SC. They only allow a water test. No air or vacuum test allowed. I've never done a water test before, but understand the basics of how it's done...

terrylove.com

 

[Tuttles Revenge]

Seems the posts likely weren't posted immediately.. but then posted in the order they were received, so didn't show up in the front of the line. Posted links to each for consideration.

 

[HS03-DD]

Test, for the same issue.

 

[Jeff H Young]

its working LOL!

 

[HS03-DD]

Woohoo!

Edit, well, maybe not. Still showing needs approval.

 

[SthnLdy]

I posted yesterday and the post is not seen. Tried posted again twice today. When I am in the post, it shows I have 1 post, but when I leave the screen it shows 0 threads or comments under my account.

 

[WorthFlorida]

Try posting again without a URL link for the first post.

 

[Comply0299]

Same issue. If it is just links I can try to post again without it; and just call out the part numbers I suppose? I thought links to the relevant pages would be useful, but I get why that might trigger the need for a check.

https://terrylove.com/forums/index.php?threads/can-i-use-a-threaded-adapter-to-replace-an-flow-control-piece-on-a-tub-spout-to-be-able-to-connect-an-npt-fitting-to-it.109899/

 

[Comply0299]

test.
edit: comment with no links, still requiring approval.

 

[alexblack]

testing if this account can post...

 

[Violetta]

Response to see if this will post too. I have a new post out there with three photos. Could that be the hitch? Thanks.

 

[Silver987]

Testing as well to see if this goes through. I tried to post a new post yesterday and still pending approval. Tried again today. Maybe it's the photo I uploaded with it?

 

[TerribleOne]

I signed up yesterday and posted a thread with a picture. It seems to have went though as there were a couple of responses to it. However all of my replies after my initial post say that they are hidden and are awaiting moderator approval. There also doesn't appear to be anyway to contact any "staff" members of this forum.

 

[Andrea Love Forum MGR]

I signed up yesterday and posted a thread with a picture. It seems to have went though as there were a couple of responses to it. However all of my replies after my initial post say that they are hidden and are awaiting moderator approval. There also doesn't appear to be anyway to contact any "staff" members of this forum.

There is a post approval system in place for all new posts or members who are newly posting. This is to protect the forum’s integrity as forums are highly targeted by spam.

We are a self hosted family run forum! I hope you find it helpful