I have a plastic push pull valve under my bathroom sink that is leaking. This valve is connected to copper piping . I want to replace this valve with a metal quarter turn valve but don't know how to get these plastic values off. The value is too close to the wall to cut off and start over. Can anyone tell me how these are attached to the copper pipe and how to remove them.
I was planning on relacing it with a compression fitting but don't know what I will find if I can get the old one off.
Thanks for any help you can provided.
I was planning on relacing it with a compression fitting but don't know what I will find if I can get the old one off.
Thanks for any help you can provided.