Keith_MN
New Member
Since PEX larger than 1 inch is expensive and difficult to source, are there any issues with running parallel 1” pex lines instead of 1-1/4” Pex or 1” copper? According to my calculations, running parallel 1” pex is about half the cost of 1” copper.
I am relocating my well tank to the other side of the basement and do not want to choke down the 1" ID inch well supply pipe by using 1” PEX. Also am thinking about this for the irrigation system to avoid the pressure drop.
I am relocating my well tank to the other side of the basement and do not want to choke down the 1" ID inch well supply pipe by using 1” PEX. Also am thinking about this for the irrigation system to avoid the pressure drop.
Last edited by a moderator: