Nami
New Member
Hi,
I would like to switch from sodium to potassium for my water softener. I am currently using these settings below. Do I need to change anything in my programming?
Fleck 5800SXT Settings:
Violet injector #00 using upflow piston
BFLC is 0.125
cubic ft resin = 2 (12 x 52 tank)
DF = Gal
VT = 5800
RF = UFbd
CT = Fd
C = 50.3
H = 23
RS = rc
RC = 300
DO = 28
RT = 3:00
BD = 192
BW = 10
RR = 5
BF = 48
FM = t0.7
RE = OFF
VR = OFF
I would like to switch from sodium to potassium for my water softener. I am currently using these settings below. Do I need to change anything in my programming?
Fleck 5800SXT Settings:
Violet injector #00 using upflow piston
BFLC is 0.125
cubic ft resin = 2 (12 x 52 tank)
DF = Gal
VT = 5800
RF = UFbd
CT = Fd
C = 50.3
H = 23
RS = rc
RC = 300
DO = 28
RT = 3:00
BD = 192
BW = 10
RR = 5
BF = 48
FM = t0.7
RE = OFF
VR = OFF
