Rldev
Member
Hi Folks,
It's been a while. I'm grateful for all the help in the past. I just refurbished my 17 year old water softener system. I emptied, cleaned and sanitized my brine tank and resin tank. I cleaned all components and replaced several. I refilled my resin tank with new gravel and 10% cross linked resin.
People: 3
Water usage Day: 120 gallons
Water Hardness: 22 grains (Hatch 5b)
Iron: 0-1
Tank Size: 9 "-48"
Head Unit: Clack WS-1
I thought I had this figured out by now. But my soft water is not lasting the week cycle.
With about 330 gallons left of "capacity", my water measured at 6 gpg hardness.
My current settings are
Hardness: 22
Capacity 24,000
Salt Dose: 8lbs
Regen Time: 7 days
There is no salt bridge. Manual regen takes everything back to full working order. Thank you.
It's been a while. I'm grateful for all the help in the past. I just refurbished my 17 year old water softener system. I emptied, cleaned and sanitized my brine tank and resin tank. I cleaned all components and replaced several. I refilled my resin tank with new gravel and 10% cross linked resin.
People: 3
Water usage Day: 120 gallons
Water Hardness: 22 grains (Hatch 5b)
Iron: 0-1
Tank Size: 9 "-48"
Head Unit: Clack WS-1
I thought I had this figured out by now. But my soft water is not lasting the week cycle.
With about 330 gallons left of "capacity", my water measured at 6 gpg hardness.
My current settings are
Hardness: 22
Capacity 24,000
Salt Dose: 8lbs
Regen Time: 7 days
There is no salt bridge. Manual regen takes everything back to full working order. Thank you.