Hello, first post. I have a small cabin in Iosco county, Michigan that is having some well trouble. The well is 2" galvanized pipe and was measuered with a plumb bob to be 40' deep. We pretty much can't get water out of it anymore. This water level is only about 6 feet down from ground level and the cabin is right on Loon lake so I don't think the well is dry. I put NuWell 100 tablets in it yesterday, but I don't think it is going to work because there might be a bremer check on top of the screen. I was hoping that the check was stuck open from being so old because my uncle said it wouldn't hold prime anymore. He installed a check valve at the top of the well some years ago. Anyway, If there is a bremer in there, is there any way I could remove it or should I suck it up and pay a local driller to come and fix it? I was quoted $700.00 to pull the bremer and screen for replacement. The only thing is, the driller won't be able to do it until mid summer when the hill leading to the cabin dries out so he can get his truck down there. Sorry for the long post. Any advice would be greatly appreciated. Thanks in advance.