eoren1
New Member
So our bathroom sink has been very slow to drain and I finally decided to do something about it. Figured one of the kids dropped a lego piece and it was wedged in the trap. Looked under, undid the trap and found nothing. I did note the perplexing design of the piping though. Wondering if there is any reason why I can't/shouldn't disassemble this thing and do a simple drop/trap/elbow/out setup. I have the clearance to lower the trap so it can then be at the height of the exit pipe (sorry, I know that's not the right term).
Thanks in advance,
E
Thanks in advance,
E