Philip Miller
New Member
So over the weekend i sprung a leak in my double vanity that was previously installed by the previous owners, in the process of using the cheaper all in one kits i got fed up and decided to go straight 1 1/2 pvc pipe since that was the previous set up, however i have hit a snag between the tailpipe that has a 1 1/4 adaptor to a 1 1/2 opening and then trying to meet this up with a wye pipe and p trap then have it bend around to the 1 1/2 water outlet, i can do a coupling with 2 " pvc sections i cut so that it would meet the p trap from the water outlet, yet im not sure if there are a pipe/tool i need to have implemented to join the tailpiece from my right sink to the wye pipe and then link that to the p trap without too much headache.
I've included some pictures, for your perusal to see if i am way off base and crazy or if there is something i need to implement or do differently....
Thanks for any assistance!
I've included some pictures, for your perusal to see if i am way off base and crazy or if there is something i need to implement or do differently....
Thanks for any assistance!
Attachments
-
IMG_0858.jpg91.4 KB · Views: 132
-
IMG_0859.jpg97.7 KB · Views: 123
-
IMG_0860.jpg94 KB · Views: 131
-
IMG_0861.jpg88.5 KB · Views: 117
-
IMG_0862.jpg86.3 KB · Views: 114
-
IMG_0863.jpg51.9 KB · Views: 116
-
IMG_0864.jpg62.8 KB · Views: 117
-
IMG_0865.jpg76.3 KB · Views: 103
-
IMG_0866.jpg83.1 KB · Views: 114
-
IMG_0867.jpg61.7 KB · Views: 124