I just bought ahouse and when the inspector tried to turn on the water the fuse immediately blow. The next thing I did was disconnect the wires at the well and and then it didn't blow so I an figuring that it is the pump, plus it is not a 3 way. Pump is at 80ft and well is 145ft. I have an irrigation system 4 full baths, but its not like they are all going to be going and a 2637 sq ft house. I was looking for advice on if I should go with a 3/4 or 1 HP and if I shown go with a bigger tank than by 32 gallon or a constant pressure. I guy says one thing the other say another. Plus what should I be looking at for price with insulation. Any advice with be greatly appreciated.