clean out plug

I was going to have a rough in inspection tomorrow on my remodel. I rearranged several bathroom and changed the drain line from cast iron to PVC where ever I could. For this reason I need to do a water test. I was planning on using the clean outs located outside the house to plug the drain with...

Hello everyone! I am looking for some guidance on how to approach an unexpected plumbing problem...So that past few days I started noticing a little bit of water in the middle of the kitchen floor, I checked the sink to see if it had been leaking and when I saw that it...

I am installing a sewage pump in my basement. I would like to connect to the waste line by using the clean out plug. Unscrew the plug. I would attach 3" threaded coupling. I would then glue a 3" hub with a 2"wye and put a clean out plug on the end of the hub. Connect the 2" sewage pump line to...

I just bought this house that was built in 1969 in Chicago area. The drain system is copper and cast iron. One of the soil stack clean out plugs is not secured. The plug has a raised head but it does NOT have male threads and neither does the pipe have female threads. There is a 4 inch rubber...

working on a drain pipe for a kitchen sink. The line runs about 30 feet total. It has two clean outs. When I opened up the first one, I had a steady stream of water coming out. This isn’t suppose to happen, right?! I have a partial clog somewhere in the line...does this tell me the clog is...

I am trying to install a water softer in the garage next to the main water shutoff. There is only a clean out plug on one of the walls. I wonder whether I can extend the clean out plug with a wye, and then add another wye to connect to a vent and a p-trap. The following diagram illustrates the...