I am ready to install a pedestal sink and toilet into a small basement bathroom.
Both fixtures will go on the same wall, which is 53 inches long.
I am debating over a regular pedestal or a corner one. I prefer NOT a corner, but I think I am tight on space.
The toilet is roughed in at 14" from the side wall (12" from the back). So, a an 18" wide tank will give me 5" from the side wall, then 18" for the tank. That leaves me with 30" for my sink and whatever room is needed on each side.
I figure I can put it 3" inches from the wall. But, most pedestal sinks are over 20" that doesnt leave much room between sink and toilet--about 8 inches or so.
Is that enough? Or should I go with the corner pedestal.
I am trying to use both sink and toilet from same manufacturer (American Standard) so that the white matches.
But American Standard's smallest pedestal is 21" wide.
I have also found this sink online which is only 16": http://www.signaturehardware.com/fa...id=GooglePLA&gclid=CKP2ysbR-MMCFXBp7Aod2WkA2g
But not sure if this unknown (to me) brand can be trusted.
Can I get some input as to fixture spacing, sink size/type, and thoughts on this sink?
Thanks.
Both fixtures will go on the same wall, which is 53 inches long.
I am debating over a regular pedestal or a corner one. I prefer NOT a corner, but I think I am tight on space.
The toilet is roughed in at 14" from the side wall (12" from the back). So, a an 18" wide tank will give me 5" from the side wall, then 18" for the tank. That leaves me with 30" for my sink and whatever room is needed on each side.
I figure I can put it 3" inches from the wall. But, most pedestal sinks are over 20" that doesnt leave much room between sink and toilet--about 8 inches or so.
Is that enough? Or should I go with the corner pedestal.
I am trying to use both sink and toilet from same manufacturer (American Standard) so that the white matches.
But American Standard's smallest pedestal is 21" wide.
I have also found this sink online which is only 16": http://www.signaturehardware.com/fa...id=GooglePLA&gclid=CKP2ysbR-MMCFXBp7Aod2WkA2g
But not sure if this unknown (to me) brand can be trusted.
Can I get some input as to fixture spacing, sink size/type, and thoughts on this sink?
Thanks.