Merry Widow
New Member
Have a Kohler Devonshire faucet that needed 2 new supply lines. I also replaced the TEE that connects to the faucet stem. When I placed the new TEE on, I did not tighten it enough. I was afraid that I would compress the washer too much. When I turn on the faucets, I see no leaks. But, when I touch the Tee, I can tell it is leaking ever so slightly. Is there a way to tighten the tee after the supply lines are on? I have heard that the supply line compression fittings cannot be removed and then reattached.
I have attached a picture of the sink TEE. Thanks
I have attached a picture of the sink TEE. Thanks