ItLeaks
New Member
Howdy folks, I just started demo on a small bathroom remodel, per wifes request. The room is 5x5 and the shower is 48 x 36. The wife asked about 2 heads in the shower, she wants a rain head and a standard head. After doing a week of reading I have 2 posssible routes. The house is on slab floor with 1/2 supply through the attic to the shower and great pressure. Also i'm in CA. and some of the valves cant be sold here, I would love to be able to run one head or both at the same time.
1 setup is a KOHLER K-679-KS-NA MasterShower 1/2-Inch Thermostatic Valve, with 2 volume control knobs.
2nd setup is a KOHLER K-304-KS-NA Rite-Temp Pressure Balancing Valve, with a KOHLER K-728-K-NA Mastershower 2 or 3-Way Transfer Valve switched to 2 way.
I did look at moentrol with the divertor on it but it wont ship to Ca.
Any ideas or input is appreciated, I havent looked at other brands simply to avoid confusion on my part. I have already learned alot here spending hours reading. Thanks in advance.
1 setup is a KOHLER K-679-KS-NA MasterShower 1/2-Inch Thermostatic Valve, with 2 volume control knobs.
2nd setup is a KOHLER K-304-KS-NA Rite-Temp Pressure Balancing Valve, with a KOHLER K-728-K-NA Mastershower 2 or 3-Way Transfer Valve switched to 2 way.
I did look at moentrol with the divertor on it but it wont ship to Ca.
Any ideas or input is appreciated, I havent looked at other brands simply to avoid confusion on my part. I have already learned alot here spending hours reading. Thanks in advance.
Last edited: