Water temp varies throughout house

Users who are viewing this thread

Casualfc

New Member
Messages
20
Reaction score
1
Points
1
Location
New Jersey
Brand new house, so lots of new tech I'm unfamiliar with.
Water temp is fine on all sinks. On both showers, though, the hot is not really hot and it gets cold quickly. Water heater is set at a normal temperature. I've heard of anti-scald shower valves but don't know much about them. I believe I have single-handle Moen on both (I will have to check) Any suggestions??
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,191
Points
113
Location
New England
Most of them have an adjustment to limit the maximum temp...yours probably are set to a low temperature. Normally, you'll need to remove the trim plate and then adjust the screw to change the limit to where you want.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks